Eco-Solvent & UV Inks That Never Clog

Physical Properties

• Viscosity: 8-12 cP at 25°C
• Surface Tension: 28-32 mN/m
• Specific Gravity: 0.95-1.05 g/cm³
• Particle Size: <5 μm
• pH: 6.8-7.2
• Flash Point: >70°C

Performance Characteristics

• Color Gamut: Exceeds ISO 12647-2
• Light Fastness: 7-8 on Blue Wool Scale
• Weather Resistance: 2-3 years outdoors (unlaminated)
• Abrasion Resistance: High (passes 300 cycle Taber test)
• Chemical Resistance: Resistant to most common cleaning solvents
• Dry Time: Touch dry in 10-15 min at 25°C, 50% RH

Anti-Clogging Properties

• Nozzle Recovery Rate: >99.5% after 30 days idle
• Maintenance Cycle: Every 7-10 days (light cleaning)
• Evaporation Rate: <0.05% per day at 25°C
• Sedimentation: <0.1% over 6 months
• Thermal Stability: -10°C to 40°C (operating)

Environmental Information

• VOC Content: <50 g/L
• Recyclable Components: Cartridge and packaging
• Biodegradability: >60% after 28 days (OECD 301B)
• Certifications: GREENGUARD Gold, REACH, RoHS
• Disposal: Follow local regulations for ink waste

Physical Properties

• Viscosity: 10-14 cP at 25°C
• Surface Tension: 22-25 mN/m
• Specific Gravity: 1.05-1.15 g/cm³
• Particle Size: <3 μm
• pH: 7.0-7.5
• Flash Point: >100°C

Performance Characteristics

• Color Gamut: Exceeds ISO 12647-2 and Adobe RGB
• Light Fastness: 8+ on Blue Wool Scale
• Weather Resistance: 3-5 years outdoors (unlaminated)
• Abrasion Resistance: Very High (passes 500 cycle Taber test)
• Chemical Resistance: Excellent resistance to solvents, acids, and alkalis
• Curing: LED/Mercury Vapor 395-405nm

Anti-Clogging Properties

• Nozzle Recovery Rate: >99.8% after 30 days idle
• Maintenance Cycle: Every 14 days (light cleaning)
• Evaporation Rate: <0.02% per day at 25°C
• Sedimentation: <0.05% over 6 months
• Thermal Stability: -5°C to 45°C (operating)

Substrate Compatibility

• Rigid Materials: Excellent adhesion to acrylic, polycarbonate, PVC, aluminum composite
• Flexible Materials: High flexibility on vinyl, banner material, fabrics
• Heat Sensitivity: Safe for heat-sensitive materials
• Stretch Factor: Up to 150% without cracking

Nanoparticle Stabilization

Our proprietary nanoparticle stabilization technology uses charged polymer encapsulation to prevent pigment particles from aggregating in the print head nozzles. This creates a stable electrostatic repulsion between particles, maintaining consistent dispersion even during extended idle periods.

• Particle size maintained at <5 μm
• Zeta potential >30 mV for optimal stability
• Prevents nozzle bridging and blockage

Self-Cleaning Agent Technology

Our inks contain specialized self-cleaning agents that continuously dissolve micro-deposits during operation. These agents work by breaking down pigment agglomerations and preventing binder crystallization in the nozzle plates.

• Active throughout printing cycle
• Does not affect ink performance or color
• Reduces need for purge cycles

Evaporation Control System

Our advanced humectant blend creates a microscopic vapor barrier at the nozzle surface, preventing premature drying while maintaining optimal jetting characteristics. This is especially effective during printer idle periods.

• Evaporation rate <0.02% per day
• Maintains optimal viscosity at nozzle surface
• Eliminates "crusting" at nozzle plate

Temperature-Adaptive Formulation

Our inks feature a temperature-responsive rheology modifier that maintains consistent viscosity across varying environmental conditions, ensuring reliable droplet formation regardless of temperature fluctuations.

• Optimized for 15-35°C operation
• Viscosity variation <5% across temperature range
• Prevents temperature-related nozzle clogging